Automatic glass sander
Full automatic glass sander, high quality and low price welcome customers to consult.
Before driving the full-automatic glass sander, check whether the observation door of the vortex chamber is closed properly, so as to prevent the material from rushing out of the observation door of the vortex chamber. The full-automatic glass sander may cause danger. Impeller rotation direction, from the direction of the feed port. The impeller should rotate counterclockwise or the motor connection should be adjusted. The starting sequence of sanding machine and conveying equipment is: discharging → sanding machine → feeding sanding machine must be started without load, and feeding can only be conducted after the vibrating crusher operates normally. The shutdown sequence of sanding machine is opposite to the startup sequence. The particles and materials shall be delivered in accordance with the requirements strictly. It is strictly prohibited to deliver materials beyond the requirements to the sander. Otherwise, the impeller may be unbalanced and excessively worn, and the impeller channel and central feeding pipe may be blocked, so that the sander can not work normally. The full-automatic glass sander shall be removed in time if it is found that large pieces of materials have been delivered. When the discharge equipment is stopped, the feeding shall be stopped, otherwise, the impeller of the sander will be killed and the motor will be burnt. During the operation of the sander, there shall be no violent vibration and abnormal noise. The new automatic glass sander, otherwise, shall be temporarily stopped for inspection. For mechanical lubrication, add a proper amount of grease for each shift of sanding machine.
Main products: automatic glass sander production, automatic glass sander sales, automatic glass sander supply, automatic glass sander